HotWind AirMover IP54
Works as a 2nd heater due to air movement.
To enable optimum heating circulation and penetration, the 'HotWind' fan has been designed to recycle rising warm air by bringing it down to ground level - where insects often hide. This air circulation will create an even temperature within a facility.
Once desired temperatures are reached, the 'HotWind' works like an extra heater to support the heating system to maximum efficiency. You can certainly use other blow fans aligned to warehouse heat treatments - but realise that the method to bring hot air ‘down’ to effective ground level requires specialist set-up and equipment.
Note:
Circulating air is different than blowing air. Once you have done a treatment where it’s hotter on the floor than under the ceiling, you will appreciate why this can be of advantage by observing the effectiveness of the final treatment.
Product Features:
- Voltage: 230 V
- Heat Output: 72 kw
- Amperage: max 0.32 A
- Room Temperature: 0 – 85C
- Noise Level: 51 dBA
- Air Circulation: 700 cubic metres/h
- Casing: Stainless Steel EN 1.4016,
- variable power output dial
- with integrated thermostat,
- IP54 (water resistant)
- Weight: 9.15 kg
- Stand: 2 kg
- Dimensions (WxDxH): 40x120x13xcm
- Suction Hose: Diameter 20 cm, heat resistant
- EESS Approved
